- 1). Unplug the dryer.
- 2). Open the lint trap and take out the lint screen. This is not needed if the lint trap is in the door. Skip to Step 4.
- 3). Take out the screws that are located under the lint trap.
- 4). Lift the top edge of the dryer slightly with your fingertips.
- 5). Slip a flat-edged screwdriver into the gap between the top of the dryer and the base.
- 6). Look for two brackets in the gap on the front end of the dryer just below the top.
- 7). Push the screwdriver blade against the bracket to pop it loose. Do this on both sides.
- 8). Lift the top of the dryer up and out of the way.
previous post
next post