- 1). Wash the plastic bottle and remove the outer labels. Dry the bottle with a towel.
- 2). Poke two small holes in the bottom of the plastic bottle with either scissors or a knife.
- 3). Thread a piece of string through the holes to make a hanger for the feeder. Tie the ends together in a knot to make a loop.
- 4). Use scissors or a knife to poke two additional holes on opposite sides of the bottle, about 3 inches away from the cap. The holes should be large enough in diameter for a chopstick to fit through.
- 5). Insert the chopstick into one hole and out the other hole on the opposite side. This is the perch for the birds.
- 6). Cut out two feeding holes with the scissors or a knife on opposite sides of the bottle, just above the chopsticks. The holes should be one third of an inch in size.
- 7). Open the cap and fill the bottle halfway with birdseed. Replace the cap.
- 8). Hang the bottle from a tree limb.
previous post
next post