- 1). Remove the keys from your Voyager's ignition and engage the parking brake. Turn the headlight switch to "OFF."
- 2). Use the hood release latch beneath the instrument panel to loosen the hood. Then, step out of the van and pull up on the auxiliary release latch beneath the center of the hood.
- 3). Remove the three screws from the top of the headlight module. Place the screws in your pocket or in a small bag for safekeeping.
- 4). Draw the headlamp assembly away from the car and then disconnect the electrical wiring connector.
- 5). Turn the signal bulb socket counterclockwise to remove it from the assembly, then pull the old bulb straight out of the socket. Install the new bulb directly into the socket.
- 6). Reconnect the electrical connector and test the new bulb to make sure it works before replacing the assembly screws and closing the hood.
next post