- 1). Remove the two Phillips screws in the armrest and the one in front of the door handle.
- 2). Place the common screwdriver between the door panel and the door at the lower rear edge. Slide the screwdriver upward until it contacts a fastener. Pry the fastener out of its hole and proceed to the next one until all have been removed on both sides and the bottom.
- 3). Tip the lower part of the door panel outward and then lift it straight up to remove the panel.
- 4). Reach behind the door panel and disconnect the electrical connector from the window switch.
- 5). Remove the door panel.
previous post
next post