- 1). Lay rat traps, and spray the surrounding floor with mouse repellent. Install rat traps near the car -- and put a spray repellent on possible access points -- if parking in a closed garage. Sweep the area, and destroy any mouse nests you find.
- 2). Identify the entry point. Remove exterior covers with a screwdriver, and then look for any holes or gaps. The blower motor in a car is located behind the glove box. Take off the glove box, and then remove the blower cap.
- 3). Cover the hole or access point with wire mesh.; the method depends on the shape and make of the blower motor. Cut a 3- by-3 -inch mesh square, place it over the motor-blower canopy and drill screws into the four corners. Use super glue or cable ties if drilling is not an option.
- 4). Apply mouse repellent around the motor, or any entrances you find. Apply a new coat every month.
previous post