- 1). Lift the mower deck up to the transport position. Drive the John Deere lawn mower to a flat, level area.
- 2). Unscrew and remove the cap screws from the blade. Slide the cutting blade off the blade mount.
- 3). Place the mulching blade onto the blade adapter. Make sure that the two small holes of the mulching blade, line up with the bushings.
- 4). Screw the cap screws back into place. Use a wrench to make sure they are tight.
- 5). If your mower deck has more than one blade, replace all the blades at the same time.
next post