- 1). Open the glove box.
- 2). Grasp the top of the fabric on the back of the glove box. Pull it down, releasing the Velcro tabs underneath it.
- 3). Remove the three clips holding the document box in place.
- 4). Remove the document box from the glove box.
- 5). Push the two tabs on each side of the filter housing toward each other while pulling away from the front of the car to remove the housing.
- 6). Remove the old filter from the filter housing.
- 7). Insert the new filter into the housing. Make sure the arrow printed on the filter matches the arrow on the housing.
- 8). Insert the housing with the new filter into the filter compartment.
- 9). Replace the document box into the glove box. Attach the three clips that hold the document box in place.
- 10
Put the fabric back in place on the back of the glove box, ensuring the Velcro tabs align with each other.