- 1). Press the On/Standby button on the VIP 622 remote control to turn off the unit.
- 2). Twist the rotating metal ferrule on one end of the coaxial cable clockwise to the threaded jack on the base of the HD antenna.
- 3). Connect the opposite end of the cable to the "HD Antenna" jack on the back of the VIP 622. The jack is on the far left.
- 4). Press the On/Standby button on the remote control to switch on the DVR, then press "Menu" to select "Setup" for scanning the available channels that can be picked up through the HD antenna connection.
next post