If you're thinking of buying a new irrigation pump for your farm or garden, this article should be a good read. You need to read the whole thing to know how to get a right irrigation pump.

Pumps are used for the irrigation of farms and gardens. They nurture crops so that farmers can get high production. They are also installed for maintaining sprinkler systems to keep lawn and gardens fresh and radient during summers and winters. However, perspective irrigation pump buyer needs to consider different factors before buying a pump. First of all being a buyer you should be very much clear about the kind of work where the pump will be used. For wide farms, high capacity pumps would be required while for garden and lawn requirement low capacity pumps are fine. Besides, the quanity of water entering an agriculture field is an extremely important factor for good crop production. Sometimes these pumps are applied in reservoirs, wells and rivers but they are not enough capable sources to provide an adequate amount of water for big farms. For this purpose, deep borewell water pumps play an integral role. They can also be applied for the irrigation of lawns and small farms. Many times people may overlook the importance of pump in irrigation, but it is advised that there is a lot of things to consider making an investment.

The main types include Deep Well and Shallow-Well Pumps. The deep well are also called jet pumps and they can be dropped by using a cord into a well that is 75-80 feet deep. These are silent because of underwater operations. Similarly, shallow-well also works underwater but is made only for surface water. They are also quite when operating. There are many types of pumps that are helpful for irrigation. Another types include

1. Booster pumps
2. Monoblock pumps
3. Solar pumps
4. Submersible pumps

Know your irrigation system:

It is vital to design your irrigation plan before purchasing because only after having the full plan ready, you will be able to know the things such as number of hose pipes and sprinklers required for your farm, the size of the field that is to be irrigated and other things. Based on these aspects, you can make a decision regarding the size and type of a water pump.

Decide the capacity of the pump:

If you want to get the best to your crops, you need to find the capacity of pump and power of the attached motor.

As mentioned earlier, there are different types of pumps available in the market. Every pump has different pros and cons, so discuss with the irrigation pump manufacturers before rushing to buy one. Make sure you have the complete knowledge about the selected pump and how to get the most of it.