- 1). Close the window in the door you intend to install the new power lock actuator. Take the switch bezel out of the Super Duty's door panel with the trim tool. Disconnect the power switches from the wiring harness by hand.
- 2). Extract all the door panel retaining hex-head screws using the socket set. Pull the door panel upward and then remove it from the Super Duty's door by hand to expose the door access holes.
- 3). Reach into the door and unplug the lock wiring connector from the power lock actuator. Take the retaining bolt out of the power lock actuator with your socket set.
- 4). Swivel the power lock actuator to unhook the actuator from the Super Duty's lock rod by hand. Take the old power lock actuator from the door and replace it with the new one.
- 5). Hook the Super Duty's new power lock actuator onto the lock rod by hand. Attach the power lock actuator to the door with the retaining bolt. Plug the lock wiring connector into the new power lock actuator manually.
- 6). Put the Super Duty's door panel back on the truck door by reversing your removal steps.
previous post