House cooling systems comprise an important part in our lives. Without them, hot and humid summers are unbearable. There are several types of cooling systems that are available in the market. Depending on the energy requirements of your house and a host of other parameters, you may choose any one of the cooling systems. There are three broad categories of home cooling systems. They are explained below:
Air circulation
If you stay in a place that does not usually face any temperature fluctuation, ventilation is not an ideal option for you. Places that face severe climatic fluctuations require air circulation. Ceiling fans work fine in such cases. They can be helpful in circulating hot or cool air throughout an area.
Central air
Central air conditioning units incorporate two different types of compressor units. One is of the standard reciprocating type and another is the durable, scroll compressor. The latter is quieter than the former one. Central air is connected to the furnace and is responsible for circulating cooled air throughout the house via the heat ducts. These kind of cooling systems help in an even transference of air in a house.
Heat pumps
These systems are capable of producing both heating and cooling effects in a single unit by navigating heat instead of generating it. Heat pump systems are available as a ground source or an air source system. Heat pumps are capable of delivering cool air throughout your house and reverse the heat flow to warm your house during the winters. Air source heat pumps congregate air from outside whereas ground-source pumps distribute heat from the ground I winters and to the ground during summers.
Cooling systems need proper maintenance to perform properly for a long time. Here are a few simple guidelines that you may find useful while maintaining your system.
1. Check your thermostat to see if the reading is accurate. You can do this by using another thermostat to check the temperature of the air in your home. If you are using a preset thermostat, you need to check your air conditioner from time to time to make sure that your system is performing properly.
2. Measure the voltage of your air conditioning unit with the help of a voltmeter.
3. Check all your electric connections and tighten wherever necessary. Lubricate the moving parts.
4. Clean the condenser with the help of a vacuum or a brush.
5. Check the condensate drain and clean it to prevent water damage and high humidity levels.
Seek the help of a professional if you need help in fixing your systems of cooling. Harrisburg, PA citizens can contact Daflure for availing expert help in this regard.
previous post