- 1). Cut out any caulking along the edges of tiles with a razor blade or a utility knife.
- 2). Pry off any molding or trim that is nailed to an adjacent surface, resting on top of the tile, using a pry bar.
- 3). Remove the grout from between the tiles. Grout is easiest removed using a rotary tool or a die grinder with a grout-removal bit. Wear protective glasses and run the spinning bit slowly back and forth along the grout lines until they are hollowed of all grout.
- 4). Vacuum all residual grout dust.
- 5). Spray white vinegar generously into the spaces between the tiles. The vinegar will seep beneath the tiles, and the acid in the vinegar will help soften the mortar. Leave the vinegar to soak for at least 45 minutes.
- 6). Begin with a center tile. Position the blade of a putty knife under the edge of the tile. Hold the handle at as low an angle as possible. Gently tap the back of the handle with a hammer to work the blade under, eventually releasing the tile. The center tile may have to be broken to better access subsequent tiles.
- 7). Continue extracting the surrounding tiles in the same manner. Now that one tile is removed, it will be easier to get a lower angle on the putty knife, increasing the likelihood of releasing tiles safely.
next post