- 1). Skim all debris and bugs from the pool. Use a skimmer to scoop out the material from the water's surface.
- 2). Vacuum debris periodically from the pool bottom. Turn off the pump; connect the vacuum hose to the filter connecter, and place the filter connecter in the interior pool skimmer.
- 3). Connect the vacuum hose to the vacuum head. Turn on the filter; ensure the filter connector has sufficient suction to start the vacuum. Vacuum the debris from the pool. Disconnect the vacuum by reversing the process listed in Steps 2 and 3.
- 4). Back ash the pool filter to purge debris from the pump system. Turn off the pump, set the filter to backwash and turn on the pump. Run the filter until the waste water runs clear. Turn off the pump and set it back to filter.
previous post