- 1). Sand the entire surface of your wood item, using fine-grit sandpaper to remove any previous surface coatings and create a smooth surface for your paint. A 1/4 sheet of sandpaper in a palm sander works well and makes the job go faster than sanding by hand.
- 2). Wipe all sanding dust off your wood, using a lint-free rag.
- 3). Stir a can of acrylic primer thoroughly--even if your paint and primer are stirred or shaken at the store, always re-stir before you apply them, as the contents may settle out quickly. Use a tintable type of primer made for wood. The tint should be as dark as possible.
- 4). Brush primer onto your wood along any places where a roller cannot reach. This usually means 2 inches surrounding any edges that meet with internal corners, plus any deeply textured areas.
- 5). Roll primer onto the remaining surfaces of your wood, using a high-quality roller pad and a frame that moves easily for even application. Allow the primer to dry thoroughly.
- 6). Stir your black acrylic paint thoroughly, distributing the pigment evenly throughout the paint. Apply it to your wood's edges with the brush, then the remaining surfaces with a roller. Use a clean brush and fresh roller pad, not those used for the primer. Allow the paint to dry completely.
- 7). Add a second coat of black paint; dark colors often require more than one coat.
previous post
next post