- 1). Ensure that the oven is unplugged from the electrical outlet before beginning to work on the oven. If you cannot reach the outlet, turn off the breaker that powers the oven at the main service panel.
- 2). Remove the oven racks from the inside of the oven to make it easier to access the element.
- 3). Unscrew the two screws from the element's mounting plate on the back of the oven wall.
- 4). Pull the element out until the wire terminals are accessible. Disconnect the wires from the terminals, which are fastened by clips that should pull out by hand.
- 5). Place the new element in the oven with the tabs pointing downward. Complete the installation by reversing the process used to remove the old element.
previous post