- 1). Locate the screws that secure the fabric softener unit to the washing machine. There are usually three or four screws, but there could be more depending on the washer.
- 2). Remove the screws using a Phillips screwdriver. Turn the screws counterclockwise to loosen them. Ensure that you remove all the screws that secure the fabric softener dispenser to the washing machine. Pull off the fabric softener dispenser unit from the washing machine.
- 3). Fill a sink with hot water and add three or four squirts of dish soap.
- 4). Soak the fabric softener dispenser in the hot, soapy water for 20 minutes. The dish soap will loosen the dried fabric softener and make it easier to scrub.
- 5). Scrub the fabric softener dispenser with a scrubbing pad and rinse thoroughly with hot water. Dry the unit with a dish towel.
- 6). Reinstall the fabric softener dispenser and secure it with the screws you removed. Turn the screws clockwise using the screwdriver. Do not over-tighten the screws.
next post