- 1). Bend down to the mower's deck level.
- 2). Position the deck directly under the tractor. Line it up so that all you will have to do is drop the pins in.
- 3). Lift the front section of the deck up. Place the first two pins in, which are located on each side of the front part.
- 4). Place the side pins in the side of the mower deck.
- 5). Drop the next pin in under the clutch gauge, directly in the center of the deck.
- 6). Place the last pin under the throttle, which is near the back in the middle of the deck.
previous post
next post