- 1). Pull open the cover at the top of the drill press using your fingers. Locate the drill press speed guide, which should be a label or sticker stuck on the inside of the cover.
- 2). Loosen the tension lock knobs located on the sides of the drill press. Locate the belt tension handle, which will be aligned with the center pulley, and mounted just below it. Rotate the belt tension handle away from the motor on the backside of the drill press.
- 3). Pull off the belts on the drill press using your fingers. Slide the replacement belts over the pulleys on the drill press, and line up the grooves in the pulleys according to the guidelines listed on the drill press speed guide under the cover.
- 4). Rotate the belt tension handle toward the motor, then tighten the tension lock knobs on the sides of the drill press.
previous post
next post