- 1). Screw the barrel into the paintball gun with a clockwise motion. Place a barrel plug in the end of the barrel to prevent accidental shots.
- 2). Screw the CO2 tank or compressed air tank into the air source adapter. The air source adapter is located under the trigger frame of the Tippmann A-5. The tank will screw in with a clockwise motion. Tighten it until it is firmly on the gun, but do not over-tighten it, since it could strip the threads.
- 3). Place the hopper onto the Cyclone Feed System. There is a tab on the hopper and Cyclone Feed System that must fit together. You cannot install this piece improperly. Fill the hopper with .68-caliber paintballs, and you are ready to use the Tippmann A-5.
previous post