- 1). Measure 2 inches in from the top and bottom edges on the hinge side of each door. Mark the measurement with a pencil.
- 2). Align the hinges on the back of the hinge side of the doors. The outside ends of the hinges should be on the pencil marks. Mark the holes in the hinges.
- 3). Drill a pilot hole 1/4 inch deep into the center of each mark you made in Step 2, using a drill and a pilot hole bit. Drive the provided screws through the hinges and holes into the cupboard doors with a screwdriver.
- 4). Position the door in place on the cabinet. Open the door and align the hinges against the cabinet frame. Mark the screw holes in the cabinet side of the hinges for each door panel.
- 5). Drill a 1/4 inch deep pilot hole in each mark you made in Step 4.
- 6). Align the cabinet side of each hinge in place and drive the provided screws into the cabinet frame to fasten each door to the cupboard.
previous post
next post