- 1). Move the system switch at the bottom, right hand side of your thermostat to "Heat" if it is not already there.
- 2). Press and release the button labeled "Schedule" on the front of your thermostat. "WAKE,""Mon-Fri" and "SET" should show on the display. Wake is the temperature you want your home at when you wake up.
- 3). Press the up or down arrow on the "Time" key to program the ake time and then press the up and down arrow on the "Temp" key to program the wake temperature.
- 4). Repeat Step 3 for "LEAVE," "RETURN" and "SLEEP." Each will come up as you complete the previous sequence. "LEAVE" is the time and temperature you want the thermostat to keep when you are away from home. "RETURN" is the time and temperature you want when you return home and "SLEEP" is the time and temperature you want while you are sleeping at night.
- 5). Press the button labeled "Schedule" until "WAKE," "SA SU" and "SET" show on the display. Your thermostat lets you program it for the weekdays, as above, as well as for the weekends.
- 6). Set the time with the up or down arrows on the "Time" key to program the weekend wake time and then use the arrows on the "Temp" key to program the temperature. Use the same steps to program the "SLEEP" time and temperature.
- 7). Press and release the button labeled "Run Program" to start the program.
- 8). Press the up or down arrow on the "Temp" key to change the temperature for the current period if you want a different temperature than the one you have programmed. The temperature will cancel itself at the next scheduled temperature change or if you press "Run Program."
- 9). Press "Hold Temp" and then set the temperature to hold a temperature.
previous post