Instructions

1

Reset the dishwasher by pressing "High Temp Wash" and then "Heated Dry" four times in a row, followed by one last "High Temp Wash." This will reset the control board on the dishwasher.
2

Wait for the lights on the control panel to turn solid. Press "Cancel/Drain."
3

Run the hot water at the kitchen sink until it feels hot. Turn off the water and select a new wash cycle on the dishwasher. Press "Start" and let the full cycle finish.
4

Contact KitchenAid for service if the "Clean" light resumes blinking, which indicates a service error that requires professional repair, such as a damaged or broken control board, heater or thermostat, as well as possible problems with the water pressure.