- 1). Turn off the power to the unit, either from the remote or front panel's "Power/Standby" button. Allow 30 minutes for the bulb and projector lamp housing to cool.
- 2). Flip the main power switch, and remove the power cord to completely disconnect the unit.
- 3). Flip the unit upside down. Use the Phillips screwdriver to remove the two screws holding the lamp cover on.
- 4). Unscrew the screws holding in the lamp housing with the Phillips screwdriver. Flip up the housing's handle and pull the old bulb straight out.
- 5). Insert the new bulb. Complete the process by reversing the bulb removal steps. The lamp timer will automatically reset.
- 6). Enter the user menu via the remote control. Press "Menu," "Options," "Lamp Settings," "Lamp Reset," then "Yes" if the lamp fails to automatically reset.