- 1). Go into the bathroom closest to your project. Look under the sink for the water lines running in.
- 2). Place a stud/metal finder on the wall adjacent to the revealed water lines. This type of device will locate wooden studs, metal studs and metal pipes.
- 3). Set your stud finder to detect metal. Calibrate the device and slowly move it along the wall until it detects metal piping.
- 4). Mark the location of the water piping with a pencil or with the electronic marking application on the stud finder.
- 5). Remove the device from the wall and repeat from the opposite direction to confirm that the water lines are where it first detected them.
next post