The gross combination weights of RV trailers simply refer to the actual weights of tow vehicles that are loaded fully and the vehicle that is being towed (such as travel trailers).
These weights also encompass and include all the fluids, optional equipment, passengers and cargo that are being transported together with the tow vehicles and the accompanying recreational vehicle.
In case you are using RV trailers that happen to be comprised of more than the single unit because it is towing a vehicle or some kind in the class of travel trailers, then you can be certain that the gross combination weights will comprise the sum total of all the weight of each and every one of all the vehicles that have been connected and every other things that is in them.
Again, remember that there is only one way in which you can accurately undertake to determine the gross combination weights of RV trailers.
This happens when you drive your entire assembly of tow vehicles and travel trailers on the scale that will measure the gross weight in combination.
However, there is an allowance in this.
This occurs when you get to determine the gross combination weights by undertaking to add up all the individual gross weights of all the vehicular components that are under combination.
However, remember that when you weigh each of the components in separation, make extreme sure that all of them have been loaded and configured exactly as you plan to load and configure them when you start on your travels.
This is because you cannot afford to make any mistakes when it comes to the weights of RV trailers.
On the other hand, there is the gross weight of the axle.
This refers to the actual total weight that will be places on some single axle.
Assuming you will be using a vehicle that is well balanced, then you can be certain that the gross weight of the axle will be distributed evenly to all of the tires that are connected to that particular axle.
In addition to the rating of the weight on your axle, the gross weight of your axle should always range within those ratings that have been set for the weight of the tire.
With regard to this, you will need to be careful of how you undertake to measure the gross weight of the axle.
Basically speaking, the gross weight of the axle on all travel trailers can be measured easily.
In case you are looking to determine the total amount of the gross weight that is placed in the long run on each of the tires, you will have to divide the total gross weight of the axle by the total number of all the tires that are connected to that tire.
To come to a suitable conclusion, remember that you may sometimes get a glimpse of the raw (the gross weight of the rear axle).
This refers to the axle that is found at the rear of RV trailers.
In the same way the raw (the gross weight of the front axle) will commonly designate the weight of the axle located at the front of travel trailers.