- 1). Cut one rectangular piece of felt that is 1-inch larger than the iPad on all four sides.
- 2). Cut another piece of felt that is 1-inch larger than the iPad on three sides, and 4-inches longer on the fourth side.
- 3). Match the two pieces of felt together on the three sides of similar length, putting the smaller piece over the larger.
- 4). Sew the pieces of felt together using a machine straight stitch 1/2-inch from the edges, on all three sides that are matched up to the edge of the smallest piece. Leave the edges of the two of differing length open.
- 5). Turn the case inside-out, hiding the seams inside the case. The longest side of the case is your flap to close the case.
- 6). Sew one piece of Velcro to the underside of the flap, centered on the width, 1-inch from the bottom edge.
- 7). Close the flap over the case and, using a pencil, mark the spot where the Velcro touches the case.
- 8). Sew a matching piece of Velcro to the front of the case on the pencil dot.
- 9). Put the iPad into the case and close the flap with the Velcro.
previous post
next post