- 1). Pry the small cube on the top row in the center of the DIY cube off with a small, flat-head screwdriver and set the cube aside. Lift the cap off the small center cube on the top with the small, flat-head screwdriver and locate the screw in the center of the cube.
- 2). Adjust the tension on the cube by turning the screw clockwise with the screwdriver to tighten the tension. Turn the screw counterclockwise to loosen the tension until it is set to the preferred tension.
- 3). Put the cap back on the top of the small center cube and fasten the small, top row center cube to the DIY cube by pressing it on until you hear the cube snap into place.
previous post
next post