- 1). Dampen the cement pool deck area, using a pressure washer. Scrub the cement with a water-based degreaser, using a coarse brush. Rinse the pool deck area, using the pressure washer. Wait four to six hours for the cement to dry.
- 2). Don protective eyewear. Pour the concrete etch into a 5-gallon bucket and add 2 gallons of clean tap water. Stir the contents for a minimum of three minutes.
- 3). Spread the concrete etching solution over the cement pool deck area, using a floor squeegee. Wait 15 minutes, and then rinse the cement, using the pressure washer. Wait four to six hours for the pool deck area to dry.
- 4). Pour the epoxy resin into a 5-gallon bucket. Stir in the catalyst, using a wooden stir stick.
- 5). Coat the etched cement pool deck area with the nonslip epoxy paint, using a roller. Wait six hours before walking on the cement.
previous post