- 1). Raise and support the vehicle on jack stands. Remove the heat shield covering the fuel filter, which is in front of the fuel tank, using the ¼-inch ratchet and a socket.
- 2). Remove the black shield over the fuel pump using the same ratchet and socket. Squeeze the white plastic spring clip all the way in, and pull the fuel line away from the filter. Do the same for the opposite side.
- 3). Install new spring clips in either side of the hose, then insert the fuel filter nozzle into the hose and push it in until it clips. Give it a couple of tugs to make sure that it is locked in. Do the same for the other side.
- 4). Replace the two shields in reverse order of removal.
previous post
next post